Sump Pump Check valve Installation

One of the ways to get handy in your home is to be able to fix little to big things around you. While hiring the services of a professional is good, there is this unmeasurable joy one feels when they are able to safely install/replace/repair an appliance in the house. This brings us to how to carry out simple installations in a sump pump. While there are several components in the sump pump, our emphasis would be on the installation of the check valve in a pump.

Purchasing the sump pump reviews is possible with the help of sump pump reviews which help to give the benefits, features, pros and cons, in comparison to other available sump pumps in the market. Beginning with the installation of a check valve, we have to start from the fundamentals. This brings us to…

Why do you need one in the first place?

If you go through several sump pump reviews, you comes across check valves. They are often tagged as recommended and this is done for a reason. Check valves are installed in sump pumps to ensure pumping water do not find its way back into the sump pit when the sump pump is switched off.


Get the necessary materials

Similar to every other installation process, you will need to provide all useful material before starting out with the check valve installation. Some of the materials needed are…

  • Pipe cleaner
  • PVC cement
  • Tape measure
  • Adapters
  • Sump pump check valve

Go shopping with a sample of your pipe

While you may be good at fixing and installing things, you may not be conversant with the names and sizes of the pipes and tools. When shopping for the check valve, take a little sample of the pipe you would be fitting the valve into. This ensures that you do not run into obstacles and hurdles during the installation process.

Turn off the sump pump

The sump pump is just like every other electrical device. For your safety, it is always advisable to turn off the sump pump before any work is done on the pump.

Get the drainage pipe

Locate the end of the drainage pipe you would fit the check valve. When this is done, make the necessary cuttings to fit into the valve. Before placing the valve on the pipe, ensure that the pipe edges are filed properly.

Seal the area

When the cuttings and filings are done properly, the next stage is to fit both the valve and drainage pipe with the aid of a cement. Using a cement applicator, get the right quantity of cement in-between the valve and pipe surface. When this is done properly, you have to allow it too dry out. To get the best gluing of both materials, the cement has to dry out properly.

Test the check valve

The end point of every installation processes is the testing stage. This stage determines if the installation was properly done or necessary adjustment needs to be made. Testing the check valve would mean you would have put on the sump pump. With the residual water still in the sump pit, listen carefully to the pressure when you switch on the sump pump. When it has worked for a while, turn off the sump pump and listen carefully to hear if there is any backflow of water.



Getting the best sump pumps with the aid of sump pump reviews can only be effective if it has a working check valve. While the installation process is fairly simple, one has to take care that it is done properly, especially if one is carrying out the installation themselves.

Leave a Reply